Template Library
What Do You Need a Template For?
625 published starting points across Checklists, Policies, Forms, Risk Assessments, and Training. Read them for free. One click adds a template to your Calm trial so you can adapt it for your organisation, site, and jurisdiction.
Looking for Policies? Browse the Policies templates.
Open the family page15 templates shown of 625
LOLER Lifting Equipment Management Guidance
Provide the school's arrangements for identifying lifting equipment, planning safe lifting operations, arranging thorough examinations and examination schemes, responding to defects, managing relevant notifications and maintaining records where the school controls, plans or uses lifting equipment.
16 sections · v2
School Lifting Equipment Dangerous-Defect Isolation Procedure
To ensure that lifting equipment or accessories are withdrawn from use when a dangerous or potentially dangerous defect is identified, that any report deadline is managed, and that equipment is only returned to use after the defect has been remedied.
14 sections · v2
School Lifting Equipment Dangerous-Defect Withdrawal Procedure
To define the action required when an examination or inspection identifies a lifting-equipment defect that is or could become a danger to people, including withdrawal from use, deadline control, remedy and return-to-use restrictions.
12 sections · v2
School Lifting Equipment Examination and Conformity Records Guidance
To define controlled arrangements for retaining, accessing and producing records of thorough examinations and inspections, and Declarations of Conformity, where a school has or controls lifting equipment or lifting accessories.
13 sections · v2
School Lifting Equipment Management Procedure
To provide an administrative procedure for identifying lifting equipment, assigning responsibility, planning lifting operations, using relevant HSE guidance, arranging thorough examinations and examination schemes, controlling defects, and keeping and communicating the required records.
19 sections · v2
School Lifting Equipment Thorough-Examination Competence Procedure
To ensure that, whenever the school arranges or commissions a LOLER thorough examination of lifting equipment or accessories, the examiner has appropriate competence, independence and impartiality, and does not assess their own routine maintenance work.
15 sections · v2
School Lifting Operations and Equipment Management Procedure
This procedure applies only where a maintained or academy primary or secondary school in England provides, hires, controls or uses lifting equipment or carries out lifting operations. It sets out how the school identifies lifting equipment and accessories, plans and supervises lifting operations, appoints competent and sufficiently independent examiners, controls installation and relocation, checks safe-working-load information, arranges thorough examinations, retains reports and acts on defects. Routine servicing or maintenance does not replace a required LOLER thorough examination.
32 sections · v2
School Lifting Operations Management Guidance
To support the planning, organisation, supervision and safe conduct of lifting operations where a school carries out or arranges lifting operations using lifting equipment.
17 sections · v2
School Lifting Operations Management Procedure
This procedure sets out how the school organises and controls lifting operations where lifting equipment is used, including arrangements for responsible roles, planning, equipment suitability, positioning, installation, markings, supervision and communication.
26 sections · v2
School Power Press Examination and Testing Procedure
To ensure that, where a school provides or uses power presses for working on cold metal, the presses and their safeguards are thoroughly examined before first use and periodically afterwards, that guards and protection devices are inspected and tested by a competent person at frequent intervals, and that records are kept.
11 sections · v2
School Work Equipment Defect, Isolation and Safe-Use Procedure
To provide a consistent procedure for inspecting work equipment, reporting deterioration or defects, withdrawing dangerous equipment from use, applying safe temporary controls where appropriate, arranging competent assessment or repair, and confirming that safety concerns have been addressed before return to service at {{school_name}}.
19 sections · v2
School Work Equipment Responsibility and Control Procedure
To define how the school identifies work equipment that it owns, operates or controls, including equipment supplied by another party; assigns responsibilities; records applicable PUWER arrangements; and retains records of equipment scope, ownership, operation, control and conformity documentation where applicable.
19 sections · v2
School Work Equipment Selection and Conformity Procedure
To provide a consistent process for selecting, providing and accepting work equipment so that equipment used by the school is suitable for its intended purpose, takes account of workplace conditions and health and safety risks, is restricted to suitable uses, and is checked for relevant conformity information and obvious defects before use.
22 sections · v2
School Work-at-Height Safe-Working Procedure
This procedure sets out safe-working arrangements for maintained and academy primary and secondary schools in England where employees undertake work at height. It is to be adapted to the school's actual activities and premises.
11 sections · v2
Work Equipment Suitability and Selection Procedure
To define how a maintained or academy school in England selects or provides work equipment by considering its intended purpose, workplace conditions and health and safety risks, and how it restricts equipment to suitable uses through local instructions and controls.
13 sections · v2