Policies

School Lifting Operations Management Guidance

To support the planning, organisation, supervision and safe conduct of lifting operations where a school carries out or arranges lifting operations using lifting equipment.

Guidance Template
CalmComplianceGuidance Template

School Lifting Operations Management Guidance

Version
v2
Updated
7 October 2026

Fields in brackets are completed when you adapt this template.

This guidance applies conditionally where the school carries out or arranges lifting operations using lifting equipment. It should be applied to the operation and equipment concerned, including operations undertaken by or on behalf of the school.

Roles and competence

The school should designate [competent person role] to plan lifting operations. The competent person should have adequate practical and theoretical knowledge and expertise in planning the lifting operations being undertaken.

Supervision should be arranged for each lifting operation. The person supervising should understand the planned arrangements and should be able to respond when the operation cannot be carried out safely.

Planning and organisation

Every lifting operation must be properly planned by a competent person, appropriately supervised and carried out in a safe manner.

The planning arrangements should identify the lifting equipment and operation covered, the roles involved, the way instructions will be communicated, and the controls required for the operation to be carried out safely.

A formal written plan is not required for every individual lifting operation. Where an operation involves a significant change from standard practice, additional planning should be undertaken to address the change.

Equipment use and instructions

Instructions for the operation should be communicated to the relevant staff and any other persons involved before the lifting operation begins. The instructions should cover the equipment and operation concerned, the roles of those involved, and the arrangements for supervision.

Where lifting equipment is used to lift or lower loads, the operation must be planned, supervised and carried out in a safe manner.

Unsafe conditions and changes

Any person involved in the operation should raise unsafe conditions, defects or relevant changes with the supervisor. The operation should not continue unless the arrangements allow it to be carried out safely.

Where a significant change from standard practice is identified, the competent person should review the arrangements and provide any additional planning or instructions needed before the operation proceeds.

Arrangements and records

The school should retain the relevant lifting-operation plans or risk assessments where these are used, together with information identifying the competent person, supervision arrangements and the instructions provided to relevant staff or contractors.

Sources

  1. LOLER 1998 Lifting Operations and Lifting Equipment Regulations (LOLER) 1998: Open learning guidance - HSEHealth and Safety Executive (HSE)
  2. Equipment and machinery frequently asked questions (FAQs) - HSEHealth and Safety Executive (HSE)
CalmCompliance · v2Template for adaptation

Template details

Type
Guidance Template
Version
v2
Updated
7 October 2026
Sections
17 sections
  • LOLER 1998 Lifting Operations and Lifting Equipment Regulations (LOLER) 1998: Open learning guidance - HSE
  • Equipment and machinery frequently asked questions (FAQs) - HSE

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.