School Lifting Equipment Management Procedure
- Version
- v2
- Updated
- 7 October 2026
Fields in brackets are completed when you adapt this template.
Applicability
Apply this procedure only where the school controls, plans or uses lifting equipment subject to thorough examination. It covers administrative arrangements and does not itself constitute physical inspection, servicing or maintenance of equipment.
Responsibility
The role responsible for coordinating this procedure is [lifting equipment responsible role]. This role identifies the relevant lifting equipment, assigns responsibility for each item, and coordinates the arrangements described below.
Procedure
1. Identify equipment and responsibilities
Identify lifting equipment that the school controls, plans or uses and determine whether it is subject to thorough examination. Record the equipment identity and the person or role responsible for its management.
2. Plan lifting operations
Use the HSE guidance on lifting equipment at work as a planning and content reference where the school has lifting equipment or staff responsible for planning lifting operations or using lifting equipment in the workplace.
3. Arrange examinations and examination schemes
Arrange thorough examinations for applicable lifting equipment and maintain any relevant examination scheme. Use the HSE guidance as a reference for thorough examination, examination schemes, action to take and record keeping.
4. Keep examination records
Keep records of thorough examinations. The records should identify the equipment and include the relevant thorough-examination reports and report dates.
5. Control and report defects
When a defect is identified, report it to the person using the equipment and to any person from whom the equipment has been hired or leased.
Where required, report the defect to the relevant enforcing authority. For most non-industrial workplaces this is the local authority; for industrial workplaces it is the HSE.
6. Communicate equipment status
Ensure that relevant equipment users, owners and lessors are informed of identified defects and the associated reporting arrangements before the equipment is treated as available for use.
Sources
- Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) - HSEHealth and Safety Executive (HSE)
- <strong>Lifting equipment at work</strong> - HSEHealth and Safety Executive (HSE)