School Work Equipment Selection and Conformity Procedure
- Version
- v2
- Updated
- 7 October 2026
1. Application
Use this procedure where a maintained or academy primary or secondary school in England provides or uses work equipment, including equipment used in classrooms, workshops, laboratories, kitchens, grounds or maintenance activities.
Apply the new-equipment checks in this procedure when new machinery or other work equipment within relevant product-supply requirements is supplied for work use.
2. Selection requirements
Select and provide equipment that is suitable for its intended purpose. Consider the conditions in the workplace where it will be used and the health and safety risks arising from its use.
Before buying new equipment or machinery, consider where and how it will be used, what it will be used for, who will use it, the health and safety risks that may result, and how effectively different manufacturers control those risks.
For complex or custom-built equipment, discuss the school's requirements with potential suppliers before placing the order.
3. Procurement specification
When placing an order, specify in writing that the equipment must be safe, meet relevant product safety legislation, have appropriate conformity marking where required, and be correctly labelled.
Record the equipment, its intended use, the relevant workplace conditions and the health and safety risks considered during selection.
4. Restrictions on use
Allow equipment to be used only for suitable purposes. Local instructions or controls must identify and prevent unsuitable use where this is necessary to manage the risks.
Where work equipment is used by staff or is under the school's control, ensure that the selected equipment is suitable for the job and that identified risks arising from its use are prevented or controlled.
5. Checks before new equipment is put into use
Before new machinery or other applicable work equipment is put into use, check that it has appropriate conformity marking and is labelled with the manufacturer's details.
Check that the equipment is accompanied by a Declaration of Conformity where required and by instructions in English. For machinery, the instructions must state how it should be used and maintained.
Assess whether the equipment is obviously unsafe in light of how it will be used and maintained. Check for obvious defects, including missing guards where relevant.
Do not provide equipment for work use unless the required conformity information, English instructions and checks for obvious defects have been addressed.
6. Records
Keep records showing the equipment, its intended use, the workplace conditions and risks considered, the controls limiting unsuitable use, and the checks completed before new equipment is put into use.
Retain relevant procurement specifications, manufacturer details, conformity marking information, the Declaration of Conformity, English instructions, delivery checks and records of defects or corrective action.
Sources
- Provision and Use of Work Equipment Regulations 1998 (PUWER) - overview - HSEHealth and Safety Executive (HSE)
- Equipment and machinery frequently asked questions (FAQs) - HSEHealth and Safety Executive (HSE)