Training

Staff health and safety information and training

General induction and awareness for school staff on job-specific health-and-safety information, employee responsibilities, higher-risk training needs and preparing to discuss local or specialist requirements.

Training Course
CalmComplianceTraining course

Staff health and safety information and training

Version
v2
Updated
7 October 2026
Audience
Teaching, support, administrative, premises and leadership staff in maintained and academy primary and secondary schools in England. The course is for general induction and awareness; staff with higher-risk duties or specific health-and-safety responsibilities require role-specific provision in addition.
Jurisdiction
england

Learning outcomes

  • Recognise that health-and-safety information and training should address risks specific to a person's job and the responsibilities identified in the school's health-and-safety policy.
  • Explain the general health-and-safety duties of school employees, including taking reasonable care, cooperating with the employer, following training and instructions, and reporting situations involving serious and immediate danger.
  • Identify when a role may require additional or specific training because it involves a greater element of risk, including possible work with industrial machinery, asbestos or hazardous-material storage and accountability.
  • Recognise the limits of general awareness training and prepare a focused discussion about the local policy, risk assessment, safe-work instructions and provider training needed for a particular role.

Lessons

  1. Why job-specific health-and-safety information matters

    Health-and-safety induction should be relevant to the work you actually do in school. It should cover risks specific to your job and the roles and responsibilities identified in the school's health-and-safety policy. A general message such as “work safely” is not a substitute for information about the tasks, equipment, people or materials connected with your role.

    The appropriate format can depend on the task and your needs. Written guidance may be suitable for some information, while a training course may be more appropriate for other work. Before starting a task, identify what you are expected to do, what risks are specific to it, and which responsibilities the local policy assigns to your role. Look for the school's current policy and relevant risk-assessment information because these explain the local arrangements rather than just the general principle.

    Hypothetical example: A new teaching assistant receives a general induction about keeping corridors clear. Their role also includes supporting practical activities and supervising pupils in a particular room. The useful next step is to ask for information about the risks and responsibilities specific to those activities and room arrangements, rather than assuming the general induction covers them.

    Practice

    You are joining a school as an administrator. You will mainly work in an office but may sometimes help receive deliveries and enter areas used for maintenance work. What should you identify or ask about before carrying out those parts of the role?

    A likely mistake is treating attendance at a general induction as proof that every task is covered. Correct this by comparing the induction with your actual duties. If a task, risk or responsibility is not addressed, raise the gap with the appropriate school contact before undertaking the work and ask what information or training is required.

  2. Employee health-and-safety responsibilities

    As a school employee, your general health-and-safety duties are to take reasonable care of your own health and safety and that of others who may be affected by what you do; cooperate with your employer on health-and-safety matters; do your work in accordance with training and instructions; and inform your employer about a work situation representing a serious and immediate danger so that remedial action can be taken.

    These duties apply across teaching and non-teaching work. Taking reasonable care includes considering how your actions may affect pupils, colleagues, visitors and yourself. Cooperation includes engaging with the school's health-and-safety arrangements. Following training and instructions means using the information provided for the work rather than improvising a different method. If you identify a situation that represents serious and immediate danger, bring it to the employer's attention so remedial action can be taken. Use the school's local reporting route if one is provided; this course does not specify that route.

    Hypothetical example: A member of support staff notices a work situation that appears to present serious and immediate danger. The appropriate general response is to bring the situation to the employer's attention so remedial action can be taken, following any applicable local reporting or emergency arrangements. The response is not to ignore it because someone else may have noticed, or to invent an unapproved solution.

    Practice

    For each situation, identify the main general duty involved: (a) you follow the instructions provided for a task; (b) you work with the employer on a safety arrangement; (c) your action could affect a pupil or colleague; (d) you identify a work situation representing serious and immediate danger.

    A likely mistake is assuming that responsibility for health and safety belongs only to leaders or premises staff. The correction is to recognise your own general duties while staying within your role and training. You should follow instructions, cooperate, take reasonable care and report serious and immediate danger; this does not mean undertaking specialist work or making unsupported changes to local arrangements.

  3. Recognising higher-risk training needs

    General induction is not always enough. Staff whose work involves a greater element of risk need extra or specific training. Examples identified in the guidance include using industrial machinery, managing asbestos, and having responsibility for the storage and accountability of potentially hazardous materials in school buildings.

    Screen the role before deciding what information is sufficient. Start with the actual tasks and responsibilities. Identify job-specific risks, then consider whether the work involves a greater element of risk or one of the specialist responsibilities described above. If it may, request additional or specific training from the appropriate school contact or training provider. This lesson helps you recognise the need; it does not teach the specialist activity or provide competence sign-off.

    Choosing the next training action Role and tasks: The work the staff member is expected to carry out. Identify job-specific risks and responsibilities: Consider risks specific to the job and responsibilities identified in the health-and-safety policy. Greater element of risk?: Decide whether the work involves greater health-and-safety risk or a specialist responsibility. Obtain local information and instructions: Obtain the relevant local policy, risk-assessment information and safe day-to-day work instructions. Request additional or specific training: Arrange appropriate additional or specific training; this course does not provide that specialist training. Role and tasks leads to Identify job-specific risks and responsibilities. Identify job-specific risks and responsibilities leads to Greater element of risk?. Greater element of risk? leads to Obtain local information and instructions. Greater element of risk? leads to Request additional or specific training.

    Hypothetical example: A premises employee is asked to use industrial machinery. General staff induction may still be relevant, but it should not be treated as sufficient specialist preparation. The employee should ask the appropriate school contact what additional or specific training is required and who should provide it before undertaking the work.

    Practice

    A colleague says that a short general induction is enough for a role involving responsibility for storing and accounting for potentially hazardous materials. What should you say or do next?

    A likely mistake is treating the examples of industrial machinery, asbestos or hazardous-material storage as a complete list of every higher-risk task. The correction is to use the broader test as well: consider whether the role involves a greater element of risk, then seek advice about additional or specific training where appropriate. Keep the decision conditional until the school's responsible person or an appropriate provider has clarified the requirement.

    When screening a role, use this sequence: identify the role and tasks; identify job-specific risks and health-and-safety responsibilities; consider whether the work involves a greater element of risk or a specialist responsibility; then either obtain the relevant local information and instructions or request additional or specific training. If the answer is uncertain, ask the appropriate school contact or training provider rather than assuming that general awareness is enough.

  4. Preparing a local training and instruction discussion

    General awareness gives you a way to identify what you need next; it does not replace the school's local policy, risk assessments, safe-work instructions or specialist training. For your particular role, prepare to discuss: the tasks you will carry out; the risks specific to those tasks; the relevant responsibilities in the health-and-safety policy; information from applicable risk assessments; safe day-to-day work instructions; whether the work involves a greater element of risk; and whether additional or specific training is needed.

    Before consulting a local plan or procedure, know what you are looking for and why. The health-and-safety policy should help you understand assigned responsibilities. Risk-assessment information should help you identify risks relevant to the job. Safe-work instructions should explain how the school expects ordinary tasks to be carried out. If the role may be higher risk, ask which additional or specific training is required and who is responsible for providing it. Local documents and routes differ, so do not infer them from this course.

    Hypothetical example: A science technician is asked to take on a new responsibility involving storage and accountability for potentially hazardous materials. Before accepting the task, they should list the responsibility, ask where the relevant local policy and risk-assessment information are held, ask for the safe day-to-day instructions, and ask whether additional or specific training is required. They should continue to follow the general employee duties, including cooperating with the employer and following training and instructions.

    Practice

    Choose a task from your school role and prepare four questions for the appropriate school contact: one about the task's job-specific risks, one about the relevant policy responsibility, one about local risk-assessment or safe-work information, and one about whether additional or specific training is needed.

    A likely mistake is asking only, “Have I completed induction?” A better question is, “What information, instruction or training does this particular task require?” This keeps general awareness separate from local instruction and specialist preparation. As a useful next step, take your completed discussion checklist to the person your school designates for health-and-safety matters or to the appropriate training provider.

Scope and limitations

  • This course does not provide a school's health-and-safety policy, local risk assessments, local reporting routes, emergency arrangements or other local processes.
  • This course does not teach the practical method for conducting a workplace risk assessment; it teaches recognition that job-specific risk assessment information and instruction may be needed.
  • This course does not provide safe day-to-day work instructions for particular jobs, equipment, buildings or substances.
  • This course does not teach or certify practical work involving industrial machinery, asbestos or hazardous materials, and does not provide practical competence sign-off.
  • Additional or specific training must be obtained for roles involving a greater element of health-and-safety risk or the stated specialist responsibilities.
  • No refresher interval is specified by the retained evidence and none is promised by this course.
CalmCompliance · v2Template for adaptation

Template details

Type
Training Course
Version
v2
Updated
7 October 2026
Lessons
4 lessons

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.