Forms

School Work Equipment Safety Inspection and Defect Record

Record work-equipment identity, maintenance and inspection arrangements, findings, defects, isolation or removal from use, corrective actions and verification before equipment is returned to service.

Form
CalmComplianceForm template

School Work Equipment Safety Inspection and Defect Record

Version
v2
Updated
7 October 2026
Audience
Primary and secondary schools in England, including maintained schools and academies; not intended for independent schools.
Jurisdiction
england

Blank fields · read-only preview

Use this form for lifting equipment and other work equipment used by the school. Record the equipment identity, maintenance and inspection arrangements, findings, defects, actions taken and verification before return to service.

Record details

School or site name

Required

Enter the school or site where the equipment is used.

Enter school or site name

Record reference

Required

Enter the local reference used to identify this inspection or defect record.

Enter reference

Inspection or defect report date

Required

Enter the date on which this record is completed.

Day
Month
Year

Inspector or reporter name

Required

Enter the name of the person completing this record.

Enter name

Equipment category or use context

Required

Select all categories that apply. Include equipment outside LOLER where it is used at work and may need safety maintenance or consideration of inspection under PUWER.

Choose all that apply

  • Lifting equipment
  • Other work equipment
  • Equipment outside LOLER
  • Equipment requiring consideration of inspection under PUWER
  • Other

If other, please specify

Equipment name or description

Required

Describe the equipment sufficiently to distinguish it from other equipment at the school.

Enter equipment name or description

Equipment identification number

Enter the asset, serial, plant or other identification number, if one exists.

Enter identification number

Equipment location

Required

State where the equipment is normally located or where the inspection took place.

Enter location

Manufacturer and model

Enter the manufacturer and model, where known.

Enter manufacturer and model

Known safe limits or rated capacity

Record the safe limit or rated capacity shown on the equipment or in the available equipment information, if applicable.

Enter limit or capacity

Maintenance and inspection arrangements

Maintenance arrangement

Required

Record how safety maintenance is arranged for this equipment, including the responsible person or service provider and any relevant schedule or procedure.

Describe the maintenance arrangement

Date of last maintenance

If maintenance has been carried out, enter the date of the most recent maintenance activity. If not applicable or not known, explain this in the notes.

Day
Month
Year

Next planned maintenance date

If a future maintenance date has been set, enter it.

Day
Month
Year

Is inspection under PUWER considered necessary for this equipment?

Required

Complete this assessment for equipment outside LOLER and any other work equipment where PUWER inspection may need consideration. Record the basis for the decision in the notes.

Choose one

  • Yes
  • No
  • Not yet assessed
  • Not applicable

Basis for inspection decision

Required

Explain why inspection under PUWER is considered necessary, not necessary, not yet assessed or not applicable. If the equipment is outside LOLER, identify that context where relevant.

Explain the inspection decision

Inspection frequency or trigger

Record the planned frequency or event that triggers inspection, where established.

Enter frequency or trigger

Date of last inspection

Enter the date of the most recent inspection, if one has taken place.

Day
Month
Year

Next planned inspection date

If a future inspection date has been set, enter it.

Day
Month
Year

Inspection findings

Inspection scope

Required

Describe the parts, functions, attachments, controls or safety features examined.

Describe the inspection scope

Inspection outcome

Required

Select the outcome that best describes the equipment at the time of inspection.

Choose one

  • No defect found
  • Defect found
  • Further assessment needed
  • Not inspected

Detailed findings

Required

Record the observed condition, test or inspection results and any limitations of the inspection.

Enter detailed findings

Defect or issue type

Complete if a defect or issue was found or further assessment is needed. Select all that apply.

Choose all that apply

  • Mechanical condition
  • Structural condition
  • Electrical or control issue
  • Guarding or safety feature
  • Attachment or accessory
  • Maintenance-related issue
  • Identification or records issue
  • Other

If other, please specify

Defect description

Complete if a defect or issue was found or further assessment is needed. Describe the defect, its location and any relevant conditions.

Describe the defect or issue

Isolation, removal from use and corrective action

Equipment status after inspection

Required

Record whether the equipment remains available for use. If it is isolated or removed from use, record the controls and action taken below.

Choose one

  • Available for use
  • Restricted use
  • Isolated
  • Removed from use
  • Awaiting further assessment

Isolation or removal-from-use details

Complete if the equipment is restricted, isolated, removed from use or awaiting further assessment. Record how use was prevented or controlled and where the equipment is located.

Describe isolation or removal-from-use arrangements

Corrective action required

Describe the repair, maintenance, replacement, adjustment, further assessment or other action required before the equipment can be considered for return to service.

Describe required corrective action

Corrective action owner

Enter the person, team or service provider responsible for completing the action.

Enter responsible person or organisation

Target corrective-action completion date

If a target date has been set, enter it.

Day
Month
Year

Corrective-action completion date

Complete when the recorded corrective action has been completed or otherwise closed.

Day
Month
Year

Verification before return to service

Is verification before return to service required?

Required

Select yes where the equipment has been restricted, isolated, removed from use or subject to corrective action. If not applicable, explain why in the verification notes.

Choose one

  • Yes
  • No
  • Not yet determined

Verification date

Complete when verification has taken place before return to service, where required.

Day
Month
Year

Verification result

Complete where verification has taken place. Record whether the equipment may return to service, remains restricted or must remain out of service.

Choose one

  • May return to service
  • May return with restrictions
  • Must remain out of service
  • Further action required

Verification details

Required

Record what was checked, who verified it and the evidence or reason supporting the result. If verification is not required, explain why.

Enter verification details

Verifier name

Enter the name of the person completing the verification, where verification is required.

Enter verifier name

Additional notes

Record any other information needed to understand this equipment record, including unresolved matters or links to local records.

Enter additional notes

Record status

Required

Select the current administrative status of this record.

Choose one

  • Open
  • Corrective action in progress
  • Awaiting verification
  • Closed
CalmCompliance · v2Template for adaptation

Template details

Type
Form
Version
v2
Updated
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.

School Work Equipment Safety Inspection and Defect Record template - CalmCompliance