School LOLER Thorough Examination Report and Defect Management Record
- Version
- v2
- Updated
- 7 October 2026
- Audience
- Primary and secondary schools in England, including maintained schools and academies, where the school is the dutyholder or user of lifting equipment or accessories undergoing a LOLER thorough examination.
- Jurisdiction
- england
Blank fields · read-only preview
Applicability and record details
Complete this record only where the school is the dutyholder or user of lifting equipment or accessories undergoing a LOLER thorough examination. Keep the written examination report and use this record to document defects, escalation, equipment controls and remedial action.
Does this record apply to the school?
RequiredSelect yes only where the school is the dutyholder or user of the lifting equipment or accessories examined.
Choose one
- Yes
- No
School name
RequiredEnter the legal or operating name of the school.
Enter school name
Internal record reference
RequiredUse the school's reference for this examination record.
Enter internal reference
Competent person or examination provider
RequiredRecord the name of the person or organisation that carried out the thorough examination.
Enter name
Examiner competence or accreditation reference
Record any competence, authorisation or accreditation reference stated in the written report.
Enter reference or state not provided
Written thorough examination report reference
RequiredRecord the report number or other identifier. Retain the written report with this record.
Enter report reference
Equipment identification
Equipment or accessory description
RequiredDescribe the lifting equipment or accessory examined, including its function and type.
Describe the equipment or accessory
Equipment serial number, asset number or other unique identifier
RequiredRecord every identifier shown on the equipment or in the written report.
Enter identifier
Location of equipment
RequiredRecord the building, room, area or other location where the equipment is normally used or stored.
Enter location
Equipment owner or responsible dutyholder
RequiredRecord the person, department, organisation or other party identified as responsible for the equipment.
Enter owner or responsible party
Equipment or accessory category
RequiredSelect all categories that apply.
Choose all that apply
- Lifting equipment
- Lifting accessory
- Equipment used to lift people
- Other category
- Other
If other, please specify
Safe working load or rated capacity
Enter the value and unit stated on the equipment or in the written report. If capacity varies, describe the limits in the notes field.
For example, 250 kg
Thorough examination dates and scope
Date of thorough examination
RequiredEnter the examination date stated in the written report.
- Day
- Month
- Year
Next thorough examination due date
RequiredEnter the next due date stated in the written report.
- Day
- Month
- Year
Examination scope and limitations
RequiredRecord the parts examined, tests performed, exclusions, limitations or conditions stated by the competent person.
Record scope and limitations
LOLER Schedule 1 report information
Other information required by LOLER Schedule 1
RequiredTranscribe or summarise the other Schedule 1 information included in the written report, including details that identify the equipment, the person or organisation conducting the examination and the result of the examination.
Record Schedule 1 information
Overall examination outcome
RequiredSelect the outcome stated or supported by the written report.
Choose all that apply
- No defects reported
- Defects reported but not identified as dangerous or potentially dangerous
- Defect identified that is or could become dangerous to people
- Serious defect requiring immediate verbal escalation
- Examination could not be completed
- Other
If other, please specify
Defects and immediate risk controls
Defects that are or could become dangerous to people
RequiredRecord each relevant defect exactly or substantially as described in the written report, including the affected part and the danger identified. If none were reported, enter none.
Describe defects or enter none
Serious-defect verbal escalation status
RequiredComplete where the report identifies a serious defect. Record when and how the dutyholder was notified immediately.
Choose one
- No serious defect identified
- Dutyholder notified verbally immediately
- Notification pending
- Notification could not be completed
- Other
If other, please specify
Verbal notification details
RequiredIf a serious defect was identified, record the date and time, recipient, notifier and method. Otherwise enter not applicable.
Record notification details or enter not applicable
Equipment use status after the examination
RequiredSelect the status implemented by the school in response to the report.
Choose one
- Withdrawn from use until defect is remedied
- Restricted use with controls specified in the report
- Use continues because no dangerous or potentially dangerous defect was identified
- Use status not yet decided
Withdrawal or restricted-use controls
RequiredRecord isolation, lockout, tagging, access restrictions, supervision or other controls applied. If not applicable, enter not applicable.
Record controls or enter not applicable
Enforcing-authority notification
Relevant enforcing-authority notification status
RequiredComplete where a dangerous or potentially dangerous defect was identified and notification is required by the report or applicable process.
Choose one
- Not applicable
- Notification sent with a copy of the written report
- Notification pending
- Notification could not be completed
- Other
If other, please specify
Enforcing-authority notification details
RequiredRecord the authority, notification date, method, recipient and any reference. If not applicable, enter not applicable.
Record notification details or enter not applicable
Remedial action and closure
Remedial action required
RequiredDescribe the repair, replacement, adjustment, destruction, further examination or other action needed to remedy each defect. If no action is required, enter none.
Describe remedial action or enter none
Remedy or withdrawal deadline
Enter the deadline stated in the report. For defects requiring immediate cessation, enter the date on which use was stopped.
- Day
- Month
- Year
Remedial action status
RequiredSelect the current status for the actions recorded above.
Choose one
- No remedial action required
- Planned
- In progress
- Completed and verified
- Overdue
Remedial action completion and verification details
RequiredRecord the action owner, completion date, evidence reference, checks performed and who verified that the equipment may be used again. If no action is required, enter not applicable.
Record completion and verification details
Record completed or reviewed by
RequiredEnter the name and role of the person completing or reviewing this record.
Enter name and role
Record completion or review date
RequiredEnter the date this record was completed or reviewed.
- Day
- Month
- Year
Further follow-up required
RequiredSelect all follow-up actions that remain open.
Choose all that apply
- None
- Monitor restricted use
- Complete repair or other remedial action
- Confirm enforcing-authority notification
- Obtain or review an updated written report
- Arrange the next thorough examination
- Other
If other, please specify