Forms

School Lifting Equipment Commissioning and Assembly Examination Record

Record the pre-use examination of lifting equipment that is newly acquired, assembled, installed or relocated, including equipment identity, location, assembly or installation details, competent person, examination result, defects and authorisation or refusal to use.

Form
CalmComplianceForm template

School Lifting Equipment Commissioning and Assembly Examination Record

Version
v2
Updated
7 October 2026
Audience
Primary and secondary schools in England, including maintained schools and academies, excluding independent schools.
Jurisdiction
england

Blank fields · read-only preview

Applicability and examination basis

Complete this record where lifting equipment is newly acquired, assembled, installed or relocated and its safety depends on assembly or installation conditions. Where equipment requires assembly or installation before use, record the examination after assembly or installation and before use at each location.


Equipment name and description

Required

Record the equipment type, model and a concise description sufficient to identify it.

e.g. mobile hoist, model and capacity

Equipment asset, serial or unique reference

Required

Enter the school asset number, serial number or another unique identifier.

Asset or serial reference

Equipment category

Required

Select all categories that describe the equipment.

Choose all that apply

  • Lifting accessory
  • Lifting appliance
  • Vehicle-mounted lifting equipment
  • Other lifting equipment
  • Other

If other, please specify

Rated capacity or safe working load

Required

Enter the rated capacity or safe working load shown on the equipment, using the unit stated on the equipment.

e.g. 500 kg

Location where examined

Required

Record the school site, building, room, work area or other precise location.

Site, building and room or work area

Reason for this examination

Required

Select every condition that applies to this examination.

Choose all that apply

  • Before first use of newly acquired equipment
  • Assembled on site
  • Installed before use
  • Relocated to this location
  • Safety depends on the conditions or method of installation
  • Other applicable commissioning condition
  • Other

If other, please specify

Date assembly, installation or relocation was completed

Required

Record the date on which the relevant assembly, installation or relocation at this location was completed.

Day
Month
Year

Date of examination

Required

The examination should be recorded after assembly or installation and before use where those conditions apply.

Day
Month
Year

Assembly and installation examination

Assembly, installation and relocation details

Required

Describe what was assembled, installed or relocated, including relevant supports, fixings, anchorage, interfaces, configuration and site conditions checked.

Describe the work completed and the safety-critical conditions examined

Assembly or installation confirmed correct and safe

Required

Confirm this only if the competent person has examined the relevant assembly or installation conditions and considers them correct and safe for the intended use.

  • Tick when complete

Checks completed

Required

Select the areas examined and record supporting detail where needed.

Choose all that apply

  • Equipment identity and markings
  • Structural condition
  • Fixings, supports and anchorage
  • Guards and safety devices
  • Controls and operating functions
  • Lifting components, attachments and accessories
  • Location and interfaces affecting safe operation
  • Relevant instructions, ratings or documentation
  • Other

If other, please specify

Examination findings

Required

Record observations, measurements, tests, limitations and any matters requiring action.

Detailed findings

Defects and outcome

Defect status

Required

Select all statuses that apply to the examination findings.

Choose all that apply

  • No defects identified
  • Defects identified but not considered to prevent immediate use
  • Defects identified that prevent use
  • Further investigation or information required before a use decision

Defects, restrictions and required actions

Required

Describe each defect or limitation, its location, the action required, responsible person and target date where known. If no defects were identified, enter “None identified”.

Defect or action details

Examination result

Required

Record the competent person's conclusion for this examination.

Choose one

  • Safe for the intended use at this location
  • Safe only with recorded restrictions
  • Not safe for use
  • Unable to conclude until further action or information is obtained

Use authorisation

Required

Select the current authorisation decision based on this record.

Choose one

  • Authorised for use
  • Authorised with recorded restrictions
  • Use refused
  • Authorisation pending further action or information

Use restrictions or conditions

Required

Record any limits, conditions, exclusion zones, supervision requirements or actions that must be completed before use. If none apply, enter “None”.

Restrictions or conditions

Competent person and record control

Competent person's name

Required

Enter the full name of the person who carried out the examination.

Full name

Competence and organisation details

Required

Record the person's role, relevant competence, employer or organisation, and any reference or certificate number used for this examination.

Role, competence, organisation and reference details

Date this record was completed

Required

Record the date on which this examination record was completed.

Day
Month
Year

Additional notes

Add any other information needed to understand the examination, result or follow-up.

Additional notes

CalmCompliance · v2Template for adaptation

Template details

Type
Form
Version
v2
Updated
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.

School Lifting Equipment Commissioning and Assembly Examination Record template - CalmCompliance