Power Press Examination and Safeguard Test Record
- Version
- v2
- Updated
- 7 October 2026
- Audience
- Primary and secondary schools in England, including maintained schools and academies, where applicable.
- Jurisdiction
- england
Blank fields · read-only preview
Applicability
Use this record only if the school provides or uses a power press for working on cold metal. If that condition does not apply, do not complete this record.
Does this record apply to the equipment being assessed?
RequiredSelect yes only where the school provides or uses a power press for working on cold metal. If no, stop and do not submit this record.
Choose one
- Yes — the school provides or uses a power press for working on cold metal
- No — this condition does not apply
Equipment and examination details
School name
RequiredEnter the name of the school completing this record.
School name
Equipment location
RequiredRecord the building, room or workshop location.
Building and room
Power press identification
RequiredRecord the manufacturer, model, serial number, asset number or another unambiguous identifier.
Manufacturer, model, serial number or asset number
Type of examination or test
RequiredSelect the applicable reason for this record.
Choose up to 3
- Thorough examination before first use
- Periodic thorough examination
- Inspection and test of guards or protection devices
- Inspection or test following repair, alteration or remedial action
- Other
If other, please specify
Date of examination, inspection or test
RequiredEnter the date on which the competent person carried out the recorded work.
- Day
- Month
- Year
Competent person name
RequiredRecord the name of the person who carried out the examination, inspection or test.
Full name
Basis for competence
RequiredDescribe the relevant training, experience, qualifications, authorisation or other basis on which the person is considered competent for this work.
Describe competence and authorisation
Inspection and test findings
What was inspected or tested?
RequiredSelect all parts of the guarding and protection system included in this record.
Choose up to 6
- Fixed guards
- Interlocking guards
- Presence-sensing or protective devices
- Two-hand controls
- Emergency-stop devices
- Other guards or protection devices
- Other
If other, please specify
Examination, inspection and test findings
RequiredDescribe the checks carried out and the results, including any relevant functional tests of guards or protection devices.
Record checks and results
Condition or outcome
RequiredSelect the outcome supported by the findings recorded above.
Choose one
- No defect identified in the scope examined
- Defects identified but use is not immediately restricted
- Use restricted pending remedial action or further assessment
- Do not use pending remedial action or further assessment
Defects and safety concerns
RequiredRecord each defect or concern identified, or state that none was identified within the scope of this record.
Defects, concerns or no defects identified
Restrictions or conditions of use
RequiredRecord any restriction, isolation, temporary control or condition that applies. If none applies, state that explicitly.
Restrictions or conditions of use
Remedial actions required or completed
RequiredRecord the action taken or required, the responsible person or contractor, and any follow-up examination or test needed.
Actions, responsibility and follow-up
Follow-up examination or test date
Complete this field if a follow-up examination or test is required. Leave blank if no follow-up date has been set.
- Day
- Month
- Year
Record completion confirmation
RequiredConfirm that the findings, defects, restrictions and remedial actions relevant to this examination, inspection or test have been recorded.
- Tick when complete
Additional notes
Add any other information needed to understand or track this record.
Additional notes