Policies

School Work Equipment Control Procedure

This procedure sets out how a school identifies work equipment and its ownership, operation or control responsibilities; arranges proportionate maintenance and inspection; controls equipment supplied by other parties; manages defects; and retains evidence of applicable PUWER arrangements where the procedure applies.

SOP Template
CalmComplianceSOP Template

School Work Equipment Control Procedure

Version
v2
Updated
7 October 2026

Fields in brackets are completed when you adapt this template.

This procedure applies at [school name] where school employees use work equipment, or where the school owns, operates or controls work equipment. It also applies to equipment supplied or owned by another party where the school’s employees use it or the school has relevant control responsibilities. [Requirement WE-01; condition: employees-use-work-equipment = yes or unknown; importance: required; source strength: required; citationId: 36be321f-9e55-4297-84b7-6546a4991a4c:0]

The procedure owner is [procedure owner role]. The role responsible for coordinating work-equipment arrangements is [equipment responsible role].

Requirement tree

WE-01 — Establish whether the procedure applies

Where school employees use work equipment, the school must address the applicable duties under the Provision and Use of Work Equipment Regulations 1998 (PUWER). The school must also consider equipment that it does not own when its employees use that equipment. The condition for this requirement is whether employees use work equipment. Acceptable evidence includes a current work-equipment inventory or scope record and a record of the applicability decision. Citation ID: 36be321f-9e55-4297-84b7-6546a4991a4c:0. Importance: required. Source strength: required.

WE-02 — Identify responsibilities

For each item within scope, identify whether the school owns, operates or controls the equipment, and identify any responsibilities arising because school employees use equipment owned or supplied by another party. The condition for this requirement is that work equipment is owned, operated, controlled or used by school employees. Acceptable evidence includes the equipment inventory or scope record and an identified responsibility record. Citation ID: 36be321f-9e55-4297-84b7-6546a4991a4c:0. Importance: required. Source strength: required.

WE-03 — Maintain equipment for safety

Equipment used at work must be maintained properly so that it remains safe to use. The condition for this requirement is that lifting equipment or other work equipment is used at work. Acceptable evidence includes planned and reactive maintenance records, defect reports, repair records, isolation records and evidence that equipment is returned to service only when safe. Citation ID: afbd747a-3edd-4a3f-a462-e8831429da53:0. Importance: required. Source strength: required.

WE-04 — Decide whether inspection is needed

For equipment used at work that is not covered by the Lifting Operations and Lifting Equipment Regulations, record whether inspection under PUWER is needed and retain the decision. The condition for this requirement is the presence of work equipment that may be outside LOLER but may require safety maintenance or PUWER consideration. Acceptable evidence includes the equipment classification, maintenance arrangements, inspection decision, inspection findings and corrective-action records. Citation ID: 6dd358ca-6460-4f87-bfd4-ca33b71c8ac3:0. Importance: required. Source strength: required.

WE-05 — Control equipment supplied by another party

Before equipment supplied or owned by another party is used by school employees, record the school’s operation or control responsibilities and include the equipment within the applicable work-equipment arrangements. The condition for this requirement is that school employees use equipment supplied or owned by another party. Acceptable evidence includes the equipment scope record, responsibility record and records showing how the equipment is controlled. Citation ID: 36be321f-9e55-4297-84b7-6546a4991a4c:0. Importance: required. Source strength: required.

WE-06 — Manage defects and return to service

Record reported defects, arrange repair or other corrective action, and isolate equipment where necessary. Equipment must be returned to service only when it is safe to use. The condition for this requirement is that a defect or unsafe condition is identified. Acceptable evidence includes defect reports, repair and corrective-action records, isolation records and the return-to-service record. Citation ID: afbd747a-3edd-4a3f-a462-e8831429da53:0. Importance: required. Source strength: required.

Procedure

1. Identify equipment within scope

Record work equipment used by school employees and equipment that the school owns, operates or controls in the work-equipment inventory held at [equipment register location]. Include equipment supplied or owned by another party when school employees use it or the school has operation or control responsibilities.

Record whether the inventory includes lifting equipment covered by LOLER, other work equipment, both, none known or an unknown classification. Record whether equipment outside LOLER is present where it may require safety maintenance or consideration of inspection under PUWER.

2. Allocate responsibility

For each item, record the school’s ownership, operation or control responsibility and whether school employees use the equipment. Where another party owns or supplies the equipment, record the arrangements used to control its use by school employees.

3. Maintain equipment

Arrange maintenance for lifting equipment and other work equipment used at work so that it remains safe to use. Record planned and reactive maintenance, repairs and any corrective action taken.

4. Consider inspection

For work equipment that is not covered by LOLER, record whether inspection under PUWER is needed. Record the inspection decision and, where inspection is undertaken, retain the findings and any corrective action.

5. Report and isolate defects

Report equipment defects through [defect reporting route]. Record the defect, repair or corrective action and any isolation. Do not return equipment to service until the available record confirms that it is safe to use.

6. Retain evidence

Retain the current equipment inventory or scope record, responsibility records, arrangements for equipment supplied by other parties, maintenance records, inspection decisions and findings, defect reports, repair records, isolation records and safe return-to-service records as evidence of how applicable PUWER arrangements are managed.

Source identity

The procedure is based on the HSE source “Safe use of work equipment - HSE”, concerning the Provision and Use of Work Equipment Regulations 1998, and the HSE source “Safe lifting by machine - HSE”. The applicable source passages are identified in the requirement tree by citation ID.

Sources

  1. Safe use of work equipment - HSEHealth and Safety Executive (HSE)
  2. Safe lifting by machine - HSEHealth and Safety Executive (HSE)
CalmCompliance · v2Template for adaptation

Template details

Type
SOP Template
Version
v2
Updated
7 October 2026
Sections
32 sections
  • Safe use of work equipment - HSE
  • Safe lifting by machine - HSE

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.