School portable electrical equipment maintenance procedure
- Version
- v2
- Updated
- 7 October 2026
Scope
Use this procedure where a maintained or academy primary or secondary school in England uses portable electrical equipment and controls equipment used at work. Apply the approach to the equipment, environment and risks present at the school.
Requirement
Portable electrical equipment that has the potential to cause injury must be maintained in a safe condition. Maintenance may involve physical maintenance or other appropriate controls needed to prevent danger.
This procedure does not impose a universal inspection or testing interval. The Electricity at Work Regulations 1989 do not specify what must be done, who must do it or how frequently it must be done; they do not make inspection or testing of electrical appliances, or annual testing, a legal requirement.
Procedure
1. Establish the equipment scope
Identify the portable electrical equipment within the scope of the maintenance scheme. Record the equipment covered or otherwise maintain a clear scope record so that the school can determine which equipment may require maintenance controls.
2. Determine proportionate controls
For each relevant item or group of equipment, determine the maintenance approach needed to keep it safe and prevent danger. Base the approach on the equipment, the environment and the risks. Do not apply an unsupported universal inspection, testing or annual testing interval.
3. Arrange maintenance, inspection or repair where needed
Carry out the selected physical maintenance or other appropriate control. Where the selected control requires inspection or repair, arrange it for the relevant equipment and retain the resulting information.
4. Control equipment that may present danger
If equipment is unsafe or may present danger, prevent its continued use by removing it from use or arranging repair. Do not return the equipment to use until the danger has been addressed.
5. Use records and labels where helpful
The school may keep inspection or test records and may label equipment as management tools. These records and labels can help monitor and review the effectiveness of the maintenance scheme and demonstrate that a scheme exists, but they are not universal legal requirements.
6. Review effectiveness
Review the maintenance scheme using the information available, including the equipment scope, maintenance approach, inspection or repair results, and actions taken for unsafe equipment. Adjust the controls where the review indicates that the scheme is not maintaining equipment in a safe condition or preventing danger.
Sources
- PAT (Portable appliance testing) - HSE's answers to popular questionsHealth and Safety Executive (HSE)