Policies

School LOLER Competent-Person and Examination Arrangements

This procedure defines how the school identifies lifting equipment and lifting accessories requiring LOLER thorough examination, appoints a competent and sufficiently independent examiner, separates routine servicing from thorough examination, retains examination reports and responds to defects or events requiring an additional examination. It applies conditionally where the school uses or controls lifting equipment or lifting accessories subject to LOLER thorough examination.

SOP Template
CalmComplianceSOP Template

School LOLER Competent-Person and Examination Arrangements

Version
v2
Updated
7 October 2026

Fields in brackets are completed when you adapt this template.

1. Applicability

This procedure applies where the school uses or controls lifting equipment or lifting accessories subject to LOLER thorough examination. Potentially relevant equipment includes lifts, hoists, mobile elevating work platforms, fork-lift trucks and lifting accessories such as chains, slings and eyebolts.

The role responsible for applying this procedure is [loler responsible role].

2. Identify equipment requiring examination

The responsible role shall identify lifting equipment and lifting accessories that the school uses or controls and determine whether each item lifts loads, lifts people or is a lifting accessory. Where more than one category applies, the examination arrangement shall address each applicable category.

The applicable examination interval shall be recorded for each item. Unless a written examination scheme specifies a different interval, equipment used to lift loads requires thorough examination every 12 months, equipment used to lift people requires thorough examination every 6 months and lifting accessories require thorough examination every 6 months.

3. Appoint the competent person

The school shall appoint a competent person to undertake each LOLER thorough examination. The competent person shall have appropriate practical and theoretical knowledge and experience of the equipment being examined, sufficient to detect defects or weaknesses and assess their importance in relation to safe and continued use.

The competent person shall have sufficient independence and impartiality to make objective decisions and authority to make recommendations without fear or favour. The appointed competent examiner is [competent examiner role].

The person who routinely services or maintains the equipment should not normally carry out its thorough examination, because that would involve assessing their own maintenance work. The school shall therefore keep routine servicing or maintenance separate from the thorough-examination function.

4. Arrange scheduled thorough examinations

The responsible role shall arrange thorough examinations at the applicable interval for each identified item, unless a written examination scheme drawn up by a competent person specifies another interval. A written examination scheme may specify shorter intervals or, exceptionally, longer intervals.

Routine servicing does not replace a LOLER thorough examination. Where servicing includes fitting new parts that are subject to LOLER, a thorough examination shall be carried out before the equipment is used.

5. Arrange additional examinations after specified events

In addition to scheduled examinations, the responsible role shall arrange a further thorough examination after an accident or dangerous occurrence, a significant change in conditions of use, the replacement of any parts subject to thorough examination, or a long period of inaction.

6. Receive and retain reports

The school shall retain the written thorough-examination reports and keep them associated with the relevant equipment. Reports shall be retained at [examination report location].

The responsible role shall record the next examination date shown by the applicable examination arrangement and use the report to identify any defect or recommendation affecting continued use.

7. Act on defects

The school shall act on defects identified by the competent person. Equipment shall not be treated as available for continued use without addressing any defect or recommendation that affects its safe and continued use.

Where an event, replacement part or period of inaction indicates that an additional thorough examination is required, the responsible role shall arrange that examination before relying on the equipment for continued use.

Sources

  1. Equipment and machinery frequently asked questions (FAQs) - HSEHealth and Safety Executive (HSE)
  2. Thorough examinations and inspections of lifting equipment - HSEHealth and Safety Executive (HSE)
CalmCompliance · v2Template for adaptation

Template details

Type
SOP Template
Version
v2
Updated
7 October 2026
Sections
22 sections
  • Equipment and machinery frequently asked questions (FAQs) - HSE
  • Thorough examinations and inspections of lifting equipment - HSE

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.