Checklists

Work-at-height equipment inspection checklist

Confirm, where applicable, that work-at-height equipment used by the school is suitable, stable and sufficiently strong; record pre-use and periodic condition checks; control defects; and confirm competent-person arrangements for scaffolding.

Checklist
CalmComplianceChecklist template

Work-at-height equipment inspection checklist

Version
v2
Updated
7 October 2026
Reviewed
7 October 2026
Who this checklist is for
Staff responsible for premises, health and safety, contractors and other competent persons involved in inspecting or arranging work-at-height equipment in primary and secondary schools.
Jurisdiction
england

14 checklist steps

Blank response areas · preview only

  1. Confirm applicability

    Use this checklist only where the school uses work-at-height equipment, such as roof-edge protection, harness eyebolts or systems, window-cleaning equipment, scaffolding or other work-at-height equipment.

  2. Identify the equipment

    Response required

    Record the equipment covered by this inspection and its location.

    Equipment type and location

  3. Identify the inspection

    Record whether this is a pre-use inspection or a periodic inspection.

    Choose one

    • Pre-use inspection
    • Periodic inspection
  4. Check suitability

    Check that the equipment is suitable for the intended work-at-height activity and the way it is being used.

    • Yes
    • No
    • Not applicable

    Notes

  5. Check stability

    Check that the equipment is stable in its intended position and arrangement.

    • Yes
    • No
    • Not applicable

    Notes

  6. Check strength

    Check that the equipment is sufficiently strong for its intended use.

    • Yes
    • No
    • Not applicable

    Notes

  7. Inspect condition

    Inspect the equipment for damage, deterioration, looseness or other condition issues that could affect safe use.

    • Yes
    • No
    • Not applicable

    Notes

  8. Record inspection findings

    Response required

    Record the inspection findings, including any condition issue identified and the equipment affected.

    Inspection findings

  9. Control defects

    If a defect or other condition issue is identified, prevent use of the affected equipment until the issue has been addressed and the equipment has been checked again.

  10. Record defect controls

    Where a defect or other condition issue was identified, record the equipment affected, the control applied, the action required and the person responsible.

    Defect control and follow-up action

  11. Check scaffolding arrangements where applicable

    Where scaffolding is used, confirm that its erection and use are arranged through competent persons.

    • Yes
    • No
    • Not applicable

    Notes

  12. Record competent-person arrangements

    Where scaffolding is used, record the competent person or organisation responsible for its erection and use.

    Competent person or organisation

  13. Record inspector details

    Response required

    Record the name, role or organisation of the person carrying out this inspection.

    Inspector name and role or organisation

  14. Record next action

    Record any follow-up inspection, maintenance, repair or other action required.

    Follow-up action

CalmCompliance · v2Template for adaptation

Template details

Type
Checklist
Version
v2
Updated
7 October 2026
Reviewed
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.