School Work-at-Height Equipment Inspection Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Maintained and academy schools in England using work-at-height equipment. Complete only the sections applicable to equipment and scaffolding arrangements present at the school.
- Jurisdiction
- england
17 checklist steps
Blank response areas · preview only
Confirm the equipment covered by this inspection
Response required
Identify the work-at-height equipment and scaffolding arrangements present at the school that are included in this inspection.
List equipment or arrangements inspected
Record the inspection purpose
State whether this is a pre-use inspection, a periodic inspection, or both.
Choose one
- Pre-use inspection
- Periodic inspection
- Pre-use and periodic inspection
Record the equipment identifier
Response required
Record the identifier, location or other description that allows the inspected equipment or arrangement to be identified.
Equipment identifier or location
Check suitability
Check that the equipment used for work at height is suitable for its intended use.
Choose one
- Suitable
- Not suitable
- Not applicable
Check stability
Check that the equipment is stable for its intended use.
Choose one
- Stable
- Not stable
- Not applicable
Check strength
Check that the equipment is sufficiently strong for its intended use.
Choose one
- Sufficiently strong
- Insufficiently strong
- Not applicable
Check general condition
Inspect the equipment and record whether it remains in good condition.
Choose one
- In good condition
- Defect or deterioration found
- Not applicable
Inspect roof-edge protection if present
If roof-edge protection is present, inspect it before use or periodically as applicable and record its condition. If it is not present, select not applicable.
Choose one
- Present and in good condition
- Present and defect found
- Not present
Inspect harness eyebolts if present
If harness eyebolts are present, inspect them before use or periodically as applicable and record their condition. If they are not present, select not applicable.
Choose one
- Present and in good condition
- Present and defect found
- Not present
Inspect window-cleaning systems if present
If systems used to secure window-cleaning equipment are present, inspect them before use or periodically as applicable and record their condition. If they are not present, select not applicable.
Choose one
- Present and in good condition
- Present and defect found
- Not present
Inspect scaffolding arrangements if present
If scaffolding is present, inspect the arrangement before use or periodically as applicable and record whether it remains in good condition. If scaffolding is not present, select not applicable.
Choose one
- Present and in good condition
- Present and defect found
- Not present
Confirm scaffolding competence if applicable
If scaffolding is being erected or used, confirm that the persons carrying out the relevant work are competent. If scaffolding is not being erected or used, select not applicable.
Choose one
- Competence confirmed
- Competence not confirmed
- Scaffolding erection or use not applicable
Record defects
Record each defect, deterioration or other condition identified during the inspection, including the affected equipment or arrangement.
Describe defects or enter No defects identified
Control defective equipment
Where a defect is identified, record the action taken to control the defective equipment or arrangement before further use.
Record isolation, restriction, repair referral or other action
Record follow-up
Record any further inspection, maintenance, repair or competence follow-up required as a result of this inspection.
Record required follow-up or enter No further action recorded
Record the inspector
Response required
Record the name or identifier of the person completing this inspection.
Inspector name or identifier
Record the inspection date
Response required
Enter the date on which this inspection was completed.
Inspection date