School Premises Access Route and Safety Glazing Inspection Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Staff responsible for premises inspections in maintained and academy primary and secondary schools in England.
- Jurisdiction
- england
19 checklist steps
Blank response areas · preview only
Record inspection details
Response required
Record the inspection date, inspector name or role, and the building or external area covered.
Date, inspector and area
Identify access routes
Response required
List the corridors, stairs, passageways and external paths included in this inspection.
List each route or area inspected
Inspect route suitability and condition
Inspect each listed access route for suitability and visible condition issues, including corridors, stairs, passageways and external paths.
- Yes
- No
- Not applicable
Notes
Check for obstructions
Check each listed access route for obstructions that could interfere with access or movement.
- Yes
- No
- Not applicable
Notes
Record access-route outcome
Select the outcome for the access routes inspected.
Choose one
- No issue observed
- Condition issue or obstruction recorded
- Area could not be inspected
Describe access-route issues
If a condition issue, obstruction or uninspected area was identified, record the precise location, observed issue and any affected route.
Location and description
Record immediate controls
Where an issue requires an immediate control, record the control used or required and identify any area that remains affected.
Control and affected area
Assign responsibility
For each recorded issue, identify the responsible person, role or team for action.
Responsible person, role or team
Determine whether glazing checks apply
Identify whether windows or transparent or translucent surfaces are present in walls, partitions, doors or gates within the inspection area.
Choose one
- Present
- Not present
- Presence could not be determined
List applicable glazing
If glazing is present, list the windows and transparent or translucent surfaces in walls, partitions, doors or gates to be checked.
Location and type of glazing
Check glazing material or protection
If applicable glazing is present, check whether each window or transparent or translucent surface is made from a safety material or is protected against breakage.
- Yes
- No
- Not applicable
Notes
Check glazing markings
If applicable glazing is present, check whether each window or transparent or translucent surface is appropriately marked.
- Yes
- No
- Not applicable
Notes
Record glazing outcome
If glazing checks apply, select the outcome for the glazing inspected.
Choose one
- No issue observed
- Material, protection or marking issue recorded
- Could not confirm material, protection or marking
Describe glazing issues
If a glazing issue or uncertainty was identified, record the precise location, surface type and the material, protection or marking issue observed.
Location and glazing issue
Record glazing controls
Where a glazing issue requires an immediate control, record the control used or required and identify any affected area.
Control and affected area
Assign glazing responsibility
For each recorded glazing issue, identify the responsible person, role or team for action.
Responsible person, role or team
Create the formal issue record
Formally record each access-route or glazing condition issue, including its location, description, responsible owner and any immediate control.
- Yes
- No
- Not applicable
Notes
Record close-out evidence
For each issue addressed, record the action taken, the date, the person or team providing the evidence and the evidence reference or description.
Action, date, person or team and evidence reference
Record outstanding follow-up
Record any issue requiring further action or reinspection, including the responsible owner and the next follow-up action.
Outstanding action and follow-up