School Non-Permanent Load Container Safety Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Staff responsible for inspecting, operating or managing lifting activities involving non-permanently attached pallets, skips, ladles or similar load containers in primary and secondary schools.
- Jurisdiction
- england
13 checklist steps
Blank response areas · preview only
Confirm applicability
Use this checklist only where a pallet, skip, ladle or similar item is carried as a load rather than being permanently attached to lifting machinery and is lifted at the school.
Identify the item
Response required
Record the item or asset identifier and describe the type of pallet, skip, ladle or similar load container being inspected.
Item or asset identifier and description
Overall inspection status
Select the outcome of the inspection.
Choose one
- No defect identified during this inspection
- Defect identified
- Unable to inspect fully
- Not applicable
General condition
Inspect the item for visible damage, deterioration or other condition issues that could affect safe use, including while it is being lifted.
Choose one
- No visible condition issue identified
- Condition issue identified
- Unable to inspect fully
- Not applicable
Damage inspection
Check accessible surfaces, edges, base, sides and other relevant parts for cracks, splits, distortion, holes, sharp damage or other visible damage.
Choose one
- No such damage identified
- Damage identified
- Unable to inspect fully
- Not applicable
Lifting points and attachments
Inspect any lifting points, lugs, handles, chains, slings, hooks or other attachments used with the item for visible damage, looseness, distortion, missing parts or other defects.
Choose one
- No visible defect identified
- Defect identified
- No lifting points or attachments used
- Unable to inspect fully
Stability and retention
Check whether the item appears stable and whether its contents or any removable parts can be retained during the intended lifting activity.
Choose one
- No issue identified
- Stability or retention issue identified
- Not applicable to this item or activity
- Unable to inspect fully
Suitability for the intended lift
Check that the item is suitable for the material, contents and lifting activity for which it is intended to be used.
Choose one
- Suitable based on the available information
- Suitability concern identified
- Suitability cannot be confirmed
- Not applicable
Record identified defects
Describe each defect, damage or other issue identified during the inspection.
Describe the defect or issue
Withdrawal decision
Where a defect, damage or suitability concern could affect safe use, record whether the item has been withdrawn from use pending an appropriate decision.
Choose one
- Withdrawn from use
- Not withdrawn
- Withdrawal not considered necessary based on this inspection
- Not applicable
Maintenance action
Record the maintenance, repair, replacement or other action required or taken in response to the inspection.
Required or completed action
Follow-up status
Select the current status of any defect, withdrawal or maintenance action.
Choose one
- No follow-up action identified
- Action remains open
- Action recorded as completed
- Escalated for further review
Additional notes
Record any other relevant observations, limitations or information needed for follow-up.
Additional notes