School Non-Permanent Load Container Inspection Record
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Primary and secondary schools in England, including maintained schools and academies, where pallets, skips, ladles or similar items are carried as loads rather than permanently attached lifting equipment.
- Jurisdiction
- england
16 checklist steps
Blank response areas · preview only
Confirm applicability
Use this record only where the item is carried as a material load and is not permanently attached to the lifting machinery.
Choose one
- Applicable
- Not applicable
- Uncertain
Identify the item type
Select the type of non-permanent load container or similar item inspected.
Choose one
- Pallet
- Skip
- Ladle
- Other similar item
Record item reference
Response required
Enter the asset number, local identifier or other reference used to identify the item.
Item reference
Record inspection date
Response required
Enter the date on which the inspection was carried out.
YYYY-MM-DD
Record inspector
Response required
Enter the name or identifier of the person carrying out the inspection.
Inspector name or identifier
Inspect the general condition
Inspect the item before use and record its overall condition, including any damage, deterioration or other defect that could affect safe use or lifting.
Choose one
- No defects seen
- Defects seen
- Not assessed
Check structural condition
Check the parts that support the load and the parts used for lifting. Record whether they are visibly intact and suitable for the intended use.
Choose one
- Intact
- Damage or deterioration identified
- Not assessed
Check lifting points and connections
Check any lifting points, attachment points, chains, slings, hooks or other connections used with the item. Record whether they are present as intended and free from visible defects.
Choose one
- Satisfactory
- Defect identified
- Not fitted or not applicable
- Not assessed
Check load retention
Check whether the item can retain its intended material load during handling and lifting. Record any opening, distortion, missing part or other issue that could allow the load to escape.
Choose one
- Satisfactory
- Defect identified
- Not applicable
- Not assessed
Record defects
Describe each defect or concern identified during the inspection. Include the affected part and any relevant location or identifying detail.
Defect details
Record withdrawal from use
If a defect or concern could affect safe use or lifting, record whether the item was withdrawn from use pending a decision or corrective action.
Choose one
- Withdrawn from use
- Not withdrawn from use
- Withdrawal not considered necessary
- Not assessed
Record withdrawal details
Where the item was withdrawn from use, record how it was identified, segregated or otherwise prevented from unintended use, and any follow-up action required.
Withdrawal and follow-up details
Confirm safe-to-lift status
Based on this inspection, record whether the item is considered safe to lift in its intended use, or whether that status could not be confirmed.
Choose one
- Safe to lift
- Not safe to lift
- Cannot confirm
Record corrective action
Record any repair, replacement, further inspection, specialist advice or other action required before the item is used or lifted.
Corrective action or further action
Record inspection outcome
Select the outcome recorded for this inspection.
Choose one
- Available for use
- Available subject to recorded action
- Withdrawn from use
- Unable to determine
Add further notes
Record any additional information relevant to the condition, inspection or safe lifting of the item.
Additional notes