School Lifting Equipment Thorough Examination Schedule for Load-Lifting Equipment
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Staff responsible for managing lifting equipment, health and safety, premises, maintenance or compliance in primary and secondary schools in England.
- Jurisdiction
- england
17 checklist steps
Blank response areas · preview only
Confirm that this checklist applies
Use this checklist where the school uses lifting equipment to lift loads and no written examination scheme specifies a different interval. If a competent person has issued a written examination scheme, use that scheme to set or adjust the examination schedule.
Choose one
- Applicable: lifting equipment is used to lift loads and no different written examination scheme is in place
- A written examination scheme applies: use or adjust the schedule to follow that scheme
- Not applicable: the school does not use lifting equipment to lift loads
Record the equipment or accessory
Response required
Record the equipment or lifting accessory covered by this schedule, including its location and an identifier that distinguishes it from other equipment.
Equipment description, location and asset or serial identifier
Classify the equipment
Select the category that determines the default examination interval where no written examination scheme specifies a different interval.
Choose one
- Equipment used to lift loads
- Equipment used to lift people
- Lifting accessory
Record the examination interval
Response required
Record the interval specified by the applicable written examination scheme. If no written examination scheme specifies a different interval, record 12 months for equipment used to lift loads, or 6 months for equipment used to lift people or for lifting accessories.
Applicable interval and whether it comes from a written examination scheme or the default interval
Record the competent person
Response required
Record the competent person or organisation arranged to carry out the thorough examination.
Name and organisation
Arrange the scheduled examination
Arrange the LOLER thorough examination by the competent person at the applicable interval.
- Yes
- No
- Not applicable
Notes
Record the examination details
Response required
Record the date of the examination, the report reference or other document identifier, and the next examination due date stated by the applicable examination scheme or interval.
Examination date; report reference; next examination due date
Retain the written report
Retain the competent person's written thorough-examination report with the equipment records.
- Yes
- No
- Not applicable
Notes
Record report findings and defects
Response required
Record the report outcome, including any defects, recommendations, restrictions or actions identified by the competent person.
Report outcome and identified defects or actions
Act on defects
Response required
Act on defects identified in the written report and record the action taken, responsible person and completion status. Do not treat the examination record as closed while required defect actions remain unaddressed.
Defect action, responsible person, action date and status
Check for an accident or dangerous occurrence
If the equipment has been involved in an accident or dangerous occurrence since the last thorough examination, arrange a further thorough examination before relying on the scheduled interval.
Choose one
- Yes: arrange or record the additional thorough examination
- No: no accident or dangerous occurrence identified
- Unknown: investigate and record the outcome
Check for a significant change in use
If there has been a significant change in the conditions of use, arrange a further thorough examination and record the change and resulting report.
Choose one
- Yes: arrange or record the additional thorough examination
- No: no significant change in conditions of use identified
- Unknown: investigate and record the outcome
Check for replacement parts
If parts subject to thorough examination have been replaced, arrange a further thorough examination before use and record the relevant work and report.
Choose one
- Yes: arrange or record the additional thorough examination before use
- No: no relevant replacement parts identified
- Unknown: investigate and record the outcome
Check for a long period of inaction
If the equipment has been inactive for a long period, arrange a further thorough examination before use and record the relevant report.
Choose one
- Yes: arrange or record the additional thorough examination before use
- No: no long period of inaction identified
- Unknown: investigate and record the outcome
Check for new parts fitted during servicing
If servicing included fitting new parts covered by LOLER, arrange a thorough examination before the equipment is used.
Choose one
- Yes: arrange or record the thorough examination before use
- No: servicing did not include relevant new parts
- Unknown: check the service record and investigate
Record additional examination evidence
Where an additional examination was triggered, record the trigger, examination date, competent person, report reference, findings, defect actions and next-due date.
Complete where an additional examination applies
Review the schedule
Review the equipment record after examinations, relevant incidents, changes in use, replacement parts, servicing or periods of inaction, and update the next-due date and actions where necessary.
- Yes
- No
- Not applicable
Notes