Checklists

School Lifting Equipment Pre-Use Inspection and Safe-Working-Load Checklist

Record operational checks of lifting equipment and accessories before use. Adapt the checks to the equipment and local control arrangements. This checklist does not replace a LOLER thorough examination.

Checklist
CalmComplianceChecklist template

School Lifting Equipment Pre-Use Inspection and Safe-Working-Load Checklist

Version
v2
Updated
7 October 2026
Who this checklist is for
Staff and competent persons responsible for using, checking or supervising lifting equipment and lifting accessories in maintained and academy primary and secondary schools in England, where such equipment is present.
Jurisdiction
england

15 checklist steps

Blank response areas · preview only

  1. Confirm applicability

    Use this checklist only where lifting equipment or lifting accessories are present and pre-use or operational checks form part of the school's control arrangements. Adapt the checklist to the equipment.

  2. Identify the equipment

    Response required

    Record the equipment or accessory identification reference, description and location in the local record.

    Equipment or accessory reference, description and location

  3. Record the configuration

    Response required

    State the configuration in which the equipment or accessory will be used, including any attachments or arrangement that may affect its safe working load.

    Configuration, attachments or arrangement

  4. Check whether assembly or installation applies

    Select the condition that applies to this use.

    Choose one

    • Assembly or installation is not required for this use
    • Assembly or installation is required for this use
    • Unknown—do not proceed until clarified
  5. Verify assembly or installation status where applicable

    Where assembly or installation is required, confirm that the equipment has been examined by a competent person after assembly and before use at the relevant location, and that the examination confirmed correct and safe installation.

    Choose one

    • Confirmed
    • Not confirmed—do not use
    • Not applicable because assembly or installation is not required
  6. Check safe-working-load information

    Confirm that the equipment or accessory is clearly marked or otherwise provided with information indicating its safe working load. For equipment whose safe working load varies by configuration, confirm that the information for the intended configuration is available.

    • Yes
    • No
    • Not applicable

    Notes

  7. Record the safe-working-load information

    Response required

    Record the safe-working-load value and unit exactly as marked or provided for the intended configuration. If the information is absent, illegible or does not apply to the intended configuration, do not use the equipment and escalate it.

    Safe-working-load value, unit and source of information

  8. Confirm the marked information matches the intended use

    Confirm that the safe-working-load information relates to the recorded equipment, attachments and configuration for this lift.

    • Yes
    • No
    • Not applicable

    Notes

  9. Check marking and labels

    Confirm that required safe-working-load markings, tags, labels or other provided information are legible and available for use. For chain or wire slings, check the durable tag, label, ferrule or master-link marking where provided.

    • Yes
    • No
    • Not applicable

    Notes

  10. Check visible condition

    Inspect the equipment and accessories for visible damage, deformation, deterioration, contamination, missing parts or other condition that could make use unsafe. Do not use equipment where an unsafe condition is identified.

    • Yes
    • No
    • Not applicable

    Notes

  11. Check attachments and connections

    Confirm that attachments, connections and components are present, correctly fitted for the intended configuration and secure before use.

    • Yes
    • No
    • Not applicable

    Notes

  12. Check examination status

    Check the local examination record or other available evidence for the equipment. Record the status and do not treat completion of this pre-use checklist as a replacement for a LOLER thorough examination.

    Choose one

    • Relevant examination evidence is available
    • Relevant examination evidence is not available—escalate before use
    • Applicability requires confirmation before proceeding
  13. Withdraw or escalate unsafe equipment

    If any check identifies missing, illegible, unsuitable or unsafe information, condition, assembly, installation, examination evidence or configuration, prevent use, identify the equipment as unavailable where practicable, and report it through the school's local arrangements.

    • Yes
    • No
    • Not applicable

    Notes

  14. Record the pre-use decision

    Record the outcome for this intended use.

    Choose one

    • Checks completed and no issue identified
    • Not suitable for use—withdraw or escalate
    • Checks could not be completed—do not proceed
  15. Record issues and actions

    Record any defect, missing information, uncertainty, escalation, withdrawal or other action taken.

    Issues identified and actions taken

CalmCompliance · v2Template for adaptation

Template details

Type
Checklist
Version
v2
Updated
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.