School Lifting Equipment Pre-Use and Examination Status Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Staff and contractors operating lifting equipment or accessories for school work in maintained and academy primary and secondary schools in England.
- Jurisdiction
- england
21 checklist steps
Blank response areas · preview only
Confirm applicability
Use this checklist only where lifting equipment or lifting accessories are operated for school work, including where contractors operate equipment under the school's control.
Identify the equipment
Response required
Record the equipment or accessory identifier used for this check.
Equipment or accessory identifier
Confirm operator arrangements
Before the lift, confirm that the operator is trained or otherwise authorised for the equipment and that the lift is planned, appropriately supervised and carried out safely by competent persons.
- Yes
- No
- Not applicable
Notes
Check certification
Check that the lifting equipment or accessory is certified for use and that the relevant certification is available.
- Yes
- No
- Not applicable
Notes
Check safe-working-load marking
Check that the equipment or accessory is marked with its safe working load and that the marking is legible.
- Yes
- No
- Not applicable
Notes
Record the marked safe working load
Response required
Record the safe working load shown on the equipment or accessory, using the unit shown on the marking.
Value and unit as marked
Check examination status
Check the available thorough-examination report or other examination record and confirm that the equipment is not overdue for examination.
- Yes
- No
- Not applicable
Notes
Record the examination due date
Record the due date shown in the applicable examination record, if one is provided.
Examination due date
Check supporting documents
Where applicable, check that the thorough-examination report, declaration of conformity and test certificate are retained and available.
- Yes
- No
- Not applicable
Notes
Check the operating environment
Check for wet, abrasive or corrosive conditions, and confirm that the equipment and accessories are suitable for the environment or protected from resulting damage or deterioration.
- Yes
- No
- Not applicable
Notes
Check visible condition
Inspect the equipment and accessories for visible damage, deterioration, deformation, missing parts or other conditions that could affect safe operation.
- Yes
- No
- Not applicable
Notes
Check configuration limits
Confirm that the planned configuration, attachments and operating arrangement are within the equipment's marked safe limits and instructions.
- Yes
- No
- Not applicable
Notes
Check the load against the safe limit
Confirm that the load to be moved does not exceed the applicable safe limit of the machine, equipment or accessory.
- Yes
- No
- Not applicable
Notes
Attach the load correctly
Check that the load is properly attached to the lifting equipment.
- Yes
- No
- Not applicable
Notes
Secure the load where necessary
Where necessary, securely bind or otherwise secure the load to prevent it slipping or falling off.
- Yes
- No
- Not applicable
Notes
Control exposure to moving or falling loads
Check that people are protected from being struck by moving parts, moving equipment or falling loads, in accordance with the lift plan and site arrangements.
- Yes
- No
- Not applicable
Notes
Record pre-use status
Select the status after completing the applicable checks.
Choose one
- No issue identified in the applicable checks
- Issue identified
- Not applicable to this equipment or operation
Report defects or concerns
If a defect, damage, deterioration, missing marking, unsafe configuration or other concern is identified, record it and report it through the school's equipment defect or maintenance process.
- Yes
- No
- Not applicable
Notes
Withdraw unsafe or overdue equipment
If the equipment is overdue for examination or is unsafe, do not use it for the lifting operation. Withdraw it from use, identify its status and arrange appropriate assessment or remedial action.
- Yes
- No
- Not applicable
Notes
Record issue details
If an issue was identified, describe the issue, the equipment status and the action or escalation required.
Issue and action details
Maintain the examination boundary
This pre-use checklist does not replace a competent person's thorough examination, planned lift arrangements, supervision or manufacturer instructions.