Checklists

School Lifting Equipment Inspection and Marking Checklist

Use where lifting equipment is present at the school and inspection or marking checks form part of its safe management. Adapt the checks to the equipment and the arrangements for the competent person carrying out the examination or inspection.

Checklist
CalmComplianceChecklist template

School Lifting Equipment Inspection and Marking Checklist

Version
v2
Updated
7 October 2026
Who this checklist is for
Staff responsible for managing lifting equipment in maintained and academy primary or secondary schools, and competent persons carrying out or supporting inspection and marking checks.
Jurisdiction
england

14 checklist steps

Blank response areas · preview only

  1. Confirm applicability

    Use this checklist only where lifting equipment is present at the school and the relevant inspection or marking checks are within the agreed safe-management arrangements.

  2. Record whether equipment is present

    Select the status for the equipment or equipment group being examined.

    Choose one

    • Present and within scope
    • Not present
    • Unable to determine
  3. Identify the equipment

    Response required

    Record an identifier or description sufficient to distinguish the equipment examined from other equipment.

    Enter asset number, location, type or other identifier

  4. Record the location

    Response required

    Record where the lifting equipment was examined.

    Enter building, room, area or other location

  5. Examine equipment marking

    Examine the marking or markings on the equipment and compare them with the applicable equipment information or requirements used by the school and competent person. Do not infer that a marking is correct solely because it is present.

    Choose one

    • Present and legible
    • Missing
    • Illegible
    • Appears incorrect
    • Unable to determine
    • Not applicable to this equipment or check
  6. Record marking observations

    Describe the marking observed and any missing, illegible, damaged or apparently incorrect information. Record the reference used to assess it where available.

    Enter marking details and comparison reference

  7. Examine positioning and installation condition

    Visually examine the equipment's positioning and installation condition within the scope of the inspection. Record any condition that may affect safe use or requires competent-person review.

    Choose one

    • No issue observed within this check
    • Issue observed
    • Unable to determine
    • Not applicable to this equipment or check
  8. Check for visible defects

    Examine accessible parts for visible defects relevant to the equipment and its intended use. Do not dismantle or perform specialist tests unless authorised and competent to do so.

    Choose one

    • No visible defect observed within this check
    • Visible defect observed
    • Unable to determine
    • Not applicable to this equipment or check
  9. Describe defects or concerns

    Describe each visible defect, marking concern, positioning concern or other observation requiring action. Include the affected part and location where possible.

    Enter defect or concern details

  10. Check inspection status information

    Review the inspection or examination status information available for the equipment, including any associated report or record used by the school. Do not infer an inspection status when the record or information cannot be verified.

    Choose one

    • Status information available and identifiable
    • Status information missing
    • Status information not legible
    • Unable to verify
    • Not applicable to this equipment or check
  11. Record the inspection or examination reference

    Record the available report, record or other reference used to check the inspection or examination status.

    Enter report number, record reference or note that none was available

  12. Determine the required action

    Based on the observations, select the action status. Where marking is missing, illegible or apparently incorrect, or where a defect or unsafe condition is identified, refer the matter to the responsible person or competent person before relying on the equipment.

    Choose all that apply

    • No further action identified from this check
    • Record and refer for review
    • Arrange for the equipment to be withheld from use pending review
    • Marking correction or confirmation needed
    • Inspection or examination follow-up needed
    • Unable to determine
  13. Record actions and escalation

    Record the action owner, referral or escalation made, any equipment-use restriction applied, and the information needed to close the issue. Do not record an issue as closed without supporting evidence.

    Enter action, owner, referral, restriction and follow-up details

  14. Complete the review

    Ensure that observations, defects, marking issues, inspection-status concerns and actions have been recorded for the identified equipment. Pass unresolved matters to the responsible person or competent person under the school's arrangements.

CalmCompliance · v2Template for adaptation

Template details

Type
Checklist
Version
v2
Updated
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.