School Lifting Equipment Examination and Certification Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Maintained and academy primary and secondary schools in England, including staff responsible for premises, equipment, maintenance, procurement or contractor control.
- Jurisdiction
- england
16 checklist steps
Blank response areas · preview only
Confirm applicability
Use this checklist only where the school provides, hires, operates or controls the use of lifting equipment or lifting accessories, including equipment operated by contractors under the school's control.
Identify the equipment
Response required
Record the equipment or accessory identification details, location and owner or supplier.
Equipment or accessory ID; description; location; owner or supplier
Record equipment type
Response required
State whether the item is lifting equipment or a lifting accessory and describe its intended use.
Type and intended use
Check safe-working-limit marking
Check the equipment or accessory for a visible marking showing its safe working load.
Choose one
- Marked
- Not marked
- Cannot establish
- Not applicable to this item
Record the marked safe working load
Transcribe the safe working load marking exactly as shown on the equipment or accessory, including any unit or other identifying notation.
Exact marking, including unit
Check certification evidence
Check whether certification evidence is available for the equipment or accessory.
Choose one
- Available
- Not available
- Cannot establish
- Not applicable
Record certification evidence
Record the reference, location or file name for the certification evidence.
Certificate reference or evidence location
Check examination status
Check the available examination information and record whether the equipment or accessory is overdue for examination.
Choose one
- Not overdue for examination
- Overdue for examination
- Cannot establish examination status
- Not applicable
Record examination details
Record the date or other identifying details shown in the available thorough-examination information.
Examination date, report reference or other identifying details
Record the thorough-examination report
Record where the thorough-examination report is retained.
Report reference or storage location
Check declaration of conformity
Check whether a declaration of conformity is available where relevant to the equipment or accessory.
Choose one
- Available
- Not available
- Cannot establish
- Not applicable
Check test certificate
Check whether a test certificate is available where relevant to the equipment or accessory.
Choose one
- Available
- Not available
- Cannot establish
- Not applicable
Check maintenance information
Review available maintenance information and record whether maintenance has been identified as required for the equipment to remain safe to use.
Choose one
- No required maintenance identified from the available information
- Maintenance required
- Cannot establish
Record defects
Response required
Record any defect, damage or other condition identified during the check, or record that none was identified.
Defect or condition, location and relevant evidence; or state none identified
Record use decision
Record the decision made for the equipment or accessory following this check.
Choose one
- Remain in use
- Remove from use
- Decision pending
- Not applicable
Record follow-up
Record actions required for missing evidence, overdue examination, maintenance, defects or removal from use, including the responsible person and action reference where available.
Action, responsible person and reference