Checklists

School Estate Safety Inspection Checklist

Support a proportionate operational inspection of school premises, plant, access routes, workplace fabric and external areas, with hazards, responsible persons, immediate controls, remedial actions and close-out evidence recorded.

Checklist
CalmComplianceChecklist template

School Estate Safety Inspection Checklist

Version
v2
Updated
7 October 2026
Who this checklist is for
Maintained and academy primary and secondary schools in England, excluding independent schools; for persons carrying out or coordinating premises safety inspections.
Jurisdiction
england

23 checklist steps

Blank response areas · preview only

  1. Define the inspection area and scope

    Before starting, identify the buildings, rooms, plant areas, access routes and external areas included in this inspection. If an area is not inspected, record it and explain why.

  2. Record inspection details

    Response required

    Record the inspection date, start time, location or site, inspector name and any accompanying person.

    Enter inspection details

  3. Confirm inspection conditions

    Record whether the inspection was conducted during normal school use, outside normal school use, or under other conditions. Note any conditions that limited the inspection.

    Choose one

    • During normal school use
    • Outside normal school use
    • Other conditions
  4. Inspect access routes

    Inspect entrances, exits, corridors, stairs, ramps, walkways and other access routes within the inspection scope. Look for obstructions, damage, unsafe surfaces, inadequate lighting or other conditions that could affect safe use.

    • Yes
    • No
    • Not applicable

    Notes

  5. Inspect doors, gates and access controls

    Check doors, gates, locks, closers, access controls and related hardware within the inspection scope. Record defects, restricted access or conditions that could affect people using the premises.

    • Yes
    • No
    • Not applicable

    Notes

  6. Inspect workplace fabric

    Inspect floors, walls, ceilings, windows, glazing, fixtures and fittings in the areas covered. Record visible damage, deterioration, instability, leaks or other conditions requiring action.

    • Yes
    • No
    • Not applicable

    Notes

  7. Inspect plant and associated systems

    Where plant or associated systems form part of the school's risk profile, inspect their condition and the surrounding area. Do not operate, isolate, dismantle or access equipment unless authorised and competent to do so.

  8. Check plant safeguards and access

    For plant included in the inspection, check for visible damage, missing guards, exposed hazards, unsafe access or signs that the plant or associated system requires specialist attention. Record the plant identifier or location.

    • Yes
    • No
    • Not applicable

    Notes

  9. Inspect internal environmental conditions

    Inspect the general condition of ventilation, heating, lighting, temperature, noise and housekeeping where these form part of the school's risk profile. Record observations and any areas requiring further assessment.

    • Yes
    • No
    • Not applicable

    Notes

  10. Inspect external areas

    Inspect grounds, paths, playgrounds, sports areas, car parks, service yards, boundaries, retaining features and other external areas within scope. Record defects, obstructions, unsafe surfaces, damaged equipment or access concerns.

    • Yes
    • No
    • Not applicable

    Notes

  11. Consider people using the premises

    Consider risks to pupils, staff, contractors, visitors and other non-employees who may use or enter the inspected areas. Record any group or activity that may require additional controls.

    Record affected people, activities or groups

  12. Record whether hazards were identified

    Select the result for the area or item inspected. A result requiring action must be recorded in the hazard and action fields below or in the school's linked action-tracking system.

    Choose one

    • No hazard observed
    • Hazard observed
    • Not inspected
    • Further assessment needed
  13. Describe each hazard or defect

    For every hazard or defect identified, record what was observed, its precise location, the affected building, room, asset or area, and any relevant identifying reference.

    Describe the hazard or defect and its location

  14. Record immediate controls

    Record any immediate control applied, such as restricting access, isolating an area or plant, removing an obstruction, providing warning information or arranging urgent attendance. Do not state that a control was applied unless it was actually applied.

    Record immediate controls applied

  15. Determine whether use or access must be restricted

    Based on the observed condition and local arrangements, record whether continued use or access requires restriction while the issue is addressed.

    Choose one

    • No restriction recorded
    • Restrict use
    • Restrict access
    • Specialist decision needed
  16. Assign a responsible person

    For each action, record the person, role, team or contractor responsible for progressing it. If no responsible person has been assigned, record that assignment is outstanding.

    Enter responsible person, role, team or contractor

  17. Record remedial action

    Describe the remedial action required, including any need for repair, replacement, maintenance, specialist inspection, further risk assessment or management decision.

    Describe the required remedial action

  18. Record the planned completion arrangement

    Record the locally agreed target date or other completion arrangement for each action. Do not create a target unless the responsible person or organisation has agreed it.

    Enter agreed target date or completion arrangement

  19. Capture supporting evidence

    Record references to photographs, work orders, contractor reports, permits, inspection records or other evidence relevant to the finding. Only record evidence that exists and can be retrieved.

    Enter evidence references or file locations

  20. Record close-out status

    For each recorded action, select the current status and retain evidence of the status selected.

    Choose one

    • Open
    • In progress
    • Awaiting close-out evidence
    • Closed with evidence
    • Not proceeding, with decision recorded
  21. Escalate unresolved issues

    Escalate any hazard that remains uncontrolled, any action without an assigned responsible person, and any issue requiring specialist advice or a management decision in accordance with the school's local arrangements.

  22. Record limitations and follow-up

    Record areas not accessed, equipment not inspected, information unavailable, weather or occupancy limitations, and any follow-up inspection or assessment required.

    Record limitations and follow-up requirements

  23. Review the inspection record

    Review the completed record for clear locations, hazard descriptions, immediate controls, responsible persons, remedial actions, completion arrangements and evidence references. Correct omissions before filing or submitting the record.

    • Yes
    • No
    • Not applicable

    Notes

CalmCompliance · v2Template for adaptation

Template details

Type
Checklist
Version
v2
Updated
7 October 2026

Get this template

Free, editable Word document. We’ll email you a download link. No Calm account needed.

Edit in Word or Google Docs.

We record your email and the template you request. Read our privacy policy.