School Emergency Lighting Monthly Test Checklist
- Version
- v2
- Updated
- 7 October 2026
- Who this checklist is for
- Primary and secondary schools in England, including maintained schools and academies, where emergency lighting is installed.
- Jurisdiction
- england
9 checklist steps
Blank response areas · preview only
Confirm applicability
Use this checklist where the school has emergency lighting, particularly emergency lighting serving escape routes.
Record the test date
Response required
Enter the date on which the monthly flash test is carried out.
DD/MM/YYYY
Record the person carrying out the test
Response required
Enter the name or role of the person carrying out the test.
Name or role
Carry out the monthly flash test
Carry out the monthly emergency-lighting flash test in accordance with the system's test arrangements.
- Yes
- No
- Not applicable
Notes
Record the overall test result
Select the result that reflects the emergency-lighting flash test.
Choose one
- No failed fittings or controls observed
- Failed fittings or controls observed
- Test not completed
Record failed fittings or controls
Response required
List each failed fitting or control and identify its location. If none were observed, enter “None observed”.
Locations and details, or None observed
Assign corrective action
Response required
For each failed fitting or control, record the corrective action, the person or team responsible, and the planned completion date. If no failure was observed, enter “No corrective action required”.
Action, responsible person or team, and planned completion date
Record any restriction before reliance
Record whether identified failures or an incomplete test need to be resolved before the emergency-lighting system is relied upon for escape lighting.
Choose one
- No restriction recorded
- Restriction recorded
- Not determined
Consider the six-month condition test
Where applicable, arrange and record a more detailed condition test every six months, including a three-hour battery test, by a competent person.